Design, Development and Implementation of the Position Estimator Algorithm for Harmonic Motion on the XY Flexural Mechanism for High Precision Positioning

This article presents a novel concept of the position estimator algorithm for voice coil actuators used in precision scanning applications. Here, a voice coil motor was used as an actuator and a sensor using the position estimator algorithm, which was derived from an electro-mechanical model of a voice coil motor. According to the proposed algorithm, the position of coil relative to the fixed magnet position depends on the current drawn, voltage across coil and motor constant of the voice coil motor. This eliminates the use of a sensor that is an integral part of all feedback control systems. Proposed position estimator was experimentally validated for the voice coil actuator in integration with electro-mechanical modeling of the flexural mechanism. The experimental setup consisted of the flexural mechanism, voice coil actuator, current and voltage monitoring circuitry and its interfacing with PC via a dSPACE DS1104 R&D microcontroller board. Theoretical and experimental results revealed successful implementation of the proposed novel algorithm in the feedback control system with positioning resolution of less than ±5 microns at the scanning speed of more than 5 mm/s. Further, proportional-integral-derivative (PID) control strategy was implemented along with developed algorithm to minimize the error. The position determined by the position estimator algorithm has an accuracy of 99.4% for single direction motion with the experimentally observed position at those instantaneous states

Design and Implementation of Position Estimator Algorithm on Voice Coil Motor

Voice Coil Motors (VCMs) have been an inevitable element in the mechanisms that have been used for precise positioning in the applications like 3D printing., micro-stereolithography., etc. These voice coil motors translate in a linear direction and require a high accuracy position sensor that amounts for a major part in the budget. In this research work., an effort has been made to design and implement an algorithm that would predict the displacement of VCM and eliminate the need of high cost sensors. VCM was integrated with dSPACE DS1104 R&D controller via linear current amplifier (LCAM) which acts as a driver circuit for VCM. Sine input was given to VCM with various amplitude and frequency and the corresponding displacement is measured by using linear variable differential transformer (LVDT). The position estimator algorithm is also implemented at the same time on VCM and its output is compared with that of LVDT. It is observed that there is 97.8 % accuracy in between algorithm output and LVDT output. Further., PID controller is used in integration with the novel algorithm to minimize the error. The estimator algorithm is tested for various amplitudes and frequencies and it is found that it has a very good agreement of 99.2% with the actual displacement measured with the help of LVDT

Design and Experimental Validation of Voice Coil Motor for High Precision Applications

Flexural structures are extensively beneficial when differentiated with conventional inflexible body structures where point accuracy positioning is strongly required extending in the range of microns. To fulfill clear and accurate positioning requirements, we come up with the solution of voice coil motors (VCM) with position estimator algorithm. Appropriate magnet and coil assembly is designed by considering the ultimate force for the application. Voice coil motor components are fabricated on milling machine and then assembled. This VCM is incorporated with dSPACE DS1104 R&D controller with the help of linear current amplifier (LCAM) which controls VCM with respect to desired amplitude and frequency. Displacement of coil of VCM is detected with respect to fixed magnet by using linear variable differential transformer (LVDT) which generates analog voltage signal in relation with motion of coil. Static characteristic such as stiffness is determined using force-deflection plot and dynamic characteristic like damping factor and frequency response are estimated with the help of transient response obtained by providing step input to the motor. Further, PID controller is implemented on this VCM and it is error observed is less than ±0.S microns